tews technologies gmbh am bahnhof 7 25469 halstenbek / germany phone: +49-(0)4101-4058-0 fax: +49-(0)4101-4058-19 e-mail: info@tews.com www.tews.com tews technologies llc 1 e. liberty street, sixth floor reno, nevada 89504 / usa phone: +1 (775) 686 6077 fax: +1 (775) 686 6024 e-mail: usasales@tews.com www.tews.com the embedded i/o company tews technologies gmbh keeps the right to change technical specification without further notice 06/2002 industrypack is a registered trademark of sbs technologies, inc. application information the TIP606 is an industrypack? compatible module and is designed for avionic test env ironments. it provides 16 optically isolated differential inputs for high unipolar input voltage which may exceed t he supply voltage of the module. the inputs can with stand input voltage up to 44v maximum between the two differential input pins. due to the differential inputs of the TIP606, it is even possible to use the module in noisy environments. the TIP606 provides a high differ ential input resistance of 112kohms typically. the interface circuit will detect a logic 1, if the differential voltage is typically greater t han +14.0v and it will detect a logic 0, if the input voltage is typically lower than +3.5v. the inputs are isolated from the ip interface via optocouplers. each input is capable of generating interrupts on rising or falling edges of the input signal. it is also possible to disable the generat ion of interrupts and poll the input register for new data. all inputs have an electronic debounce circuit. the debounce time is programmable in a range from 900s up to 230ms in 256 steps of 900s. the debounce circuit can also be disabled. the TIP606 is designed for an operating temperature from -40c to +85c. for first-time-buyers t he engineering documentation TIP606-ed is recommended. the engineering documentation includes tip 606-doc, schematics and data sheets. the driver software TIP606-sw -xx provides functions to configure the TIP606, read the input status and connect software events to input state changes. technical information ! interface according to industrypack specification ! identification-prom s upports auto-configuration ! single size industrypack ! 16 interrupt generating di fferential digital inputs ! up to 44v signal voltage for all 16 inputs ! optocouplers for galvanic isol ation of input to computer system ! all inputs have an electronic debounce circuit, debounce time is freely programmable ! operating temperat ure -40c to +85c industry pack i/o interface industry pack logic interface id-prom input register with interrupt capability 8 bit vector decoder electronic debouncing 16 opto- couplers 16 input circuits order information TIP606-10 16 interrupt generat ing digital inputs TIP606-doc user documentation TIP606-ed engineering documentation, includes TIP606-doc TIP606-sw-12 os-9 software support TIP606-sw-32 psos software support TIP606-sw-42 vxworks software support TIP606-sw-62 windows nt 4.0 software support TIP606-sw-72 lynxos software support TIP606-sw-82 linux software support TIP606-sw-92 qnx 4 software support TIP606-sw-95 qnx 6 software support TIP606 16 interrupt generating digital inputs .com .com .com .com 4 .com u datasheet
|
